- Видео 753
- Просмотров 2 538 812
FLOW-3D
США
Добавлен 9 июл 2009
Watch CFD webinars, simulations, and tutorials on the FLOW-3D RUclips Channel. The FLOW-3D family of products is comprised of powerful and highly accurate CFD software packages that provide engineers with valuable insights into fluid flow phenomena. While FLOW-3D specializes in the solution of time-dependent, free-surface problems, it also models confined flows and steady-state problems. FLOW-3D is the ideal CFD software to use in the design phase of a project as well as in improving production processes. FLOW-3D is used by organizations ranging in size from Fortune 500 firms to small, family-owned enterprises. It is used to solve the toughest CFD problems in a wide variety of application areas. Headquartered in Santa Fe, New Mexico, Flow Science has distributors and offers support for its FLOW-3D products throughout the world.
Stormwater Sediment Basin | FLOW-3D HYDRO
In addition to simulating erosion, FLOW-3D HYDRO's sediment transport physics can be used to evaluate the settling of sediments in suspension. In this stormwater sediment basin example, the inlet flow contains suspended sediment. As sediment settles out of the flow and deposits on the basin floor, the solid geometry is adjusted within the FLOW-3D HYDRO model, as seen in the first bay of the sediment basin. A scalar is also used to visualize the flow patterns through the model domain. To learn more about FLOW-3D HYDRO, visit www.flow3d.com/products/flow-3d-hydro/.
Просмотров: 243
Видео
Wastewater Screening Channel Flow Assessment | FLOW-3D HYDRO
Просмотров 438День назад
This FLOW-3D HYDRO model simulates the flow through an inlet works screening channel. As shown on the plots, the flow is measured at the two outlet channels and through each of the four screening channels. The flow through the left-middle channel exceeds the other channels due to the concentration of flow around the upstream bend. If this is an undesirable condition due to potentially overloadi...
Advanced Flow Modeling Solutions for the Produced Water Industry Webinar | FLOW-3D HYDRO
Просмотров 22514 дней назад
In recent years, the reuse and recycling of flowback and produced water has been one of the most discussed topics in the oil and gas industry. As the scarcity of water resources grows, the handling of produced water has been evolving away from disposal and towards recycling. Computational fluid dynamics (CFD) modeling, which has seen major growth in water related applications in civil, environm...
Flow Control with a Vortex Valve | FLOW-3D HYDRO
Просмотров 26421 день назад
Vortex valves are a type of flow control device that operates similarly to an orifice. An advantage of vortex valves is that you are able to maintain a larger diameter opening when compared to a similarly performing orifice, reducing its potential to get clogged with debris during a storm event. Because of the larger opening, the vortex valve passes more flow during the early part of a storm. W...
Tailings Runout Sensitivity | FLOW-3D HYDRO
Просмотров 382Месяц назад
We used computational fluid dynamics, to evaluate tailings flow sensitivity to various modeling options and rheological parameter inputs. We studied flow behavior using a full-scale numerical flume composed of an 80 m long, 2 m wide rectangular channel with a 10 cubic meter discharge of saturated tailings. Results from this study provide a guide to understanding model sensitivity to input param...
Baffled Drop Shaft Comparison | FLOW-3D HYDRO
Просмотров 216Месяц назад
This video, courtesy of IIHR, Wade Trim, and Northeast Ohio Regional Sewer District, shows a comparison of a FLOW-3D HYDRO CFD model of a baffled drop draft structure under wet weather conditions with a physical laboratory model. Learn how FLOW-3D HYDRO is used to model drop shafts and other stormwater infrastructure at www.flow3d.com/products/flow-3d-hydro/conveyance-infrastructure/
Powder Directed Energy Deposition Additive Manufacturing - Bead Geometry Modelling | FLOW-3D AM
Просмотров 179Месяц назад
In this simulation, we use Computational Fluid Dynamics (CFD) model of FLOW-3D AM to predict the morphology of bead in DED Additive Manufacturing. The simulation captures the dilution of newly deposited material into the previous layer or substrate. Moreover, the temperature, solid fraction, and velocity inside the melt pool are calculated which gives a detailed picture of the bead formation in...
Multipass Simulation of SS316L Powder-fed Directed Energy Deposition (DED) | FLOW-3D AM
Просмотров 193Месяц назад
This powder-fed directed energy deposition (DED) simulation animation shows 3 layers, or passes, of material deposition along a straight strack. The SS316L powder is fed by 2 sources along the perpendicular axis to the laser motion. Learn more about FLOW-3D AM by visiting www.flow3d.com/products/flow3d-am/.
Multipass Simulation of Two Material Powder-fed Directed Energy Deposition (DED) | FLOW-3D AM
Просмотров 213Месяц назад
This powder-fed directed energy deposition (DED) simulation animation shows 3 layers, or passes, of material deposition along an L-shaped track. The powder feed contains 2 materials, each with separate material properties that affect the thermals and bead dimensionality of the tracks. This animation visualizes the four powder sources and laser beam. Learn more about FLOW-3D AM by visiting www.f...
Melt Pool Simulation of Overhang Dross in Laser Powder Bed Fusion (LPBF) | FLOW-3D AM
Просмотров 169Месяц назад
This laser powder bed fusion (LPBF) simulation animation shows 3 melt tracks as the laser beam approaches a down-facing overhang surface that runs parallel to the laser motion. The lack of structural support beneath the overhang surface causes the melt pool to sink lower than its neighboring layers, producing an effect called "Dross". Naturally, dross formation causes dimensional inaccuracy, hi...
Melt Pool and Laser Beam Visualization of Laser Powder Bed Fusion (LPBF) Simulation | FLOW-3D AM
Просмотров 174Месяц назад
This laser powder bed fusion (LPBF) simulation animation showcases the unique post processing capabilities available with FLOW-3D POST. The melt region and heat-affected zone are isolated from the surrounding powder bed as the ring-shaped laser beam is visualized scanning along the track length. Learn more about FLOW-3D AM by visiting www.flow3d.com/products/flow3d-am/.
Junction Manhole Losses | FLOW-3D HYDRO
Просмотров 608Месяц назад
Understanding the hydraulic losses at junction manholes can be very important when designing sewer infrastructure and assessing hydraulic grade lines in the system. Three-dimensional computational fluid dynamics modeling can help you estimate these losses and evaluate design alternatives. This FLOW-3D HYDRO example compares three design options for a junction manhole: 1) base model with no benc...
KO2 Spillway PMF Flood Cross Section | FLOW-3D HYDRO
Просмотров 4832 месяца назад
This FLOW-3D HYDRO simulation shows a cross section of the flow down a tailings storage facility (TSF) spillway during a probable maximum flood (PMF), as modeled by MECATER Ingénierie of Tunisia. "We found that CFD modeling was a powerful tool for evaluating the design of our spillway structure. In fact, with its capability to simulate hydraulic jump and real conditions such as air entertainmen...
Liquid Metal Deposition | FLOW-3D WELD
Просмотров 4342 месяца назад
In this simulation, we study the deposition of liquid metal droplets on a moving substrate with FLOW-3D. Thanks to the two-fluid solution, we can analyze the velocity and temperature in the gas surrounding the metal droplet. The simulation predicts the morphology of the deposited track. For simplicity, the nozzle was not included in the simulation and the liquid metal enters the domain using th...
Fusion Zone During Hairpin Laser Welding | FLOW-3D WELD
Просмотров 1372 месяца назад
The weld dimensions are monitored during hairpin welding to ensure defect free and optimal process. Creating a digital twin of the process in FLOW-3D WELD adds another layer to the hairpin welding control and enables prediction of the influence of laser parameters on the melt pool behavior and final shape of the weld. For more information on FLOW-3D WELD, visit www.flow3d.com/products/flow3d-we...
Hairpin Laser Welding Simulation | FLOW-3D WELD
Просмотров 2092 месяца назад
Hairpin Laser Welding Simulation | FLOW-3D WELD
Hairpin Laser Welding | FLOW-3D WELD
Просмотров 1872 месяца назад
Hairpin Laser Welding | FLOW-3D WELD
Tailings and Non-Newtonian Fluids | FLOW-3D HYDRO
Просмотров 3022 месяца назад
Tailings and Non-Newtonian Fluids | FLOW-3D HYDRO
Wave Overtopping Comparison | FLOW-3D HYDRO
Просмотров 7072 месяца назад
Wave Overtopping Comparison | FLOW-3D HYDRO
Flip Bucket Spillway | FLOW-3D HYDRO
Просмотров 3922 месяца назад
Flip Bucket Spillway | FLOW-3D HYDRO
Hydraulic Jump in a Sink | FLOW-3D HYDRO
Просмотров 2563 месяца назад
Hydraulic Jump in a Sink | FLOW-3D HYDRO
Floating Flood Barrier | FLOW-3D HYDRO
Просмотров 5003 месяца назад
Floating Flood Barrier | FLOW-3D HYDRO
Frac Tank Hydraulics | FLOW-3D HYDRO
Просмотров 3413 месяца назад
Frac Tank Hydraulics | FLOW-3D HYDRO
Hybrid 2D/3D Bridge Hydraulics | FLOW-3D HYDRO
Просмотров 3023 месяца назад
Hybrid 2D/3D Bridge Hydraulics | FLOW-3D HYDRO
Spillway Gate Opening | FLOW-3D HYDRO
Просмотров 1,7 тыс.3 месяца назад
Spillway Gate Opening | FLOW-3D HYDRO
Spillway Debris Screen | FLOW-3D HYDRO
Просмотров 1,1 тыс.3 месяца назад
Spillway Debris Screen | FLOW-3D HYDRO
Hello sir, I saw yours videos of centrifugal casting and I want the full tutoriel can u please send it to me for research. Thank you in advance.
amazing..thanks for teaching
Is there a webinar or a tutorial on scour modeling using Flow 3D hydro?
Yes. One of the built-in examples in HYDRO covers this.
Naveen Yousif, have you any idea about software that from where we can get this software? I am also working on the souring of the bridge pier